Keithley 2230G-30-3 - [Source:]Output:enable

Section
5: SCPI command reference Series 2230G Triple-Channel Power Supplies
User's Manual
5-30 2230G-900-01 Rev. A / June 2018
Example
CURR:UP
Increases the current value by one step.
See also
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement] (on page 5-29)
[SOURce:]OUTPut:ENABle
This command sets the output state of the power supply.
Group
Source
Syntax
[SOURce:]OUTPut:ENABle <bool>
Arguments
<bool> The output state of the power supply.
ON|OFF|0|1 1 means enable and 0 means disable.
Default value
1
Returns
Not applicable
Example
OUTP:ENAB 0
Disable the output of the power supply.
OUTP:ENAB 1
Enable the output of the power supply.
See also
None