Keithley 2230G-30-3 - Fetch[:Scalar][:Voltage][:DC]

Series 2230G
Triple-Channel Power Supplies User's Manual Section 5:
SCPI command reference
2230G-900-01 Rev. A / June 2018 5-23
Returns
<NR2> The newly measured power with the unit of measure W.
Example
FETC:POW? ALL
Returns the new power measurements on all channels.
See also
MEASure[:SCALar]:POWer[:DC]? (on page 5-24)
FETCh[:SCALar][:VOLTage][:DC]?
This command queries the new current voltage on a specified channel or channels.
Group
Measurement
Syntax
FETch[:SCALar][:VOLTage][:DC]? {CH1|CH2|CH3|ALL}
Arguments
CH1|CH2|CH3|ALL The channel or channels with the measurement to return.
Default value
Not applicable
Returns
<NR2> The newly measured voltage with the unit of measure V.
Example
FETC:VOLT? ALL
Returns the new voltage measurements on all channels.
See also
MEASure[:SCALar][:VOLTage][:DC]? (on page 5-25)