Keithley 2230G-30-3 - Calibrate:initital; Calibrate:save

Series 2230G
Triple-Channel Power Supplies User's Manual Section 5:
SCPI command reference
2230G-900-01 Rev. A / June 2018 5-13
CALibrate:INITital
This command sets the current calibration coefficient as the default value.
Group
Calibration
Syntax
CALibrate:INITital
Arguments
None
Default value
Not applicable
Returns
Not applicable
Example
CAL:INIT
Sets the current calibration coefficient as the default value.
See also
None
CALibrate:SAVe
This command saves the calibration coefficient into nonvolatile memory.
Group
Calibration
Syntax
CALibrate:SAVe
Arguments
None
Default value
Not applicable
Returns
Not applicable