5: SCPI command reference Series 2230G Triple-Channel Power Supplies
5-40 2230G-900-01 Rev. A / June 2018
Returns
<NR1> Range: 0 to 255 (query form)
Example
STAT:OPER:ENAB 128
Sets the eighth bit of the Operation Event Enable Register to 1, and all other bits to 0.
See also
*PSC (on page 5-5)
STATus:OPERation[:EVENt]?
This command reads and then clears the Operation Event Register of the status model.
Group
Status
Syntax
STATus:OPERation[:EVENt]?
Arguments
None
Default value
0
Returns
<NR1> Range: 0 to 255
Example
STAT:OPER?
Reads the Operation Event Register and then resets it.
See also
STATus:OPERation:ENABle (on page 5-39)