Keithley 2230G-30-3 - [Source:]Voltage[:Level]:Down[:Immediate][:Amplitude]; [Source:]Voltage[:Level][:Immediate][:Amplitude]

Series 2230G
Triple-Channel Power Supplies User's Manual Section 5:
SCPI command reference
2230G-900-01 Rev. A / June 2018 5-35
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude]
This command decreases the voltage value of the present channel by one step, as specified by the
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement] command.
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude]
Arguments
None
Default value
Not applicable
Returns
Not applicable
Example
VOLT:DOWN
Decreases the voltage value of the present channel by one step.
See also
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement] (on page 5-36)
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
This command sets the voltage value of the power supply. The query version of this command gets the set value
of the power supply.
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf>
[SOURce:]VOLTage [:LEVel][:IMMediate][:AMPLitude]?
Arguments
MIN to MAX|MIN||MAX|UP|DOWN|DEF The voltage value.
kV|V|mV Unit of measure for the voltage value.
Default value
1 V
Returns
Voltage value