116 Keysight M8070A Programming Guide
5 SCPI Command Reference
:STATus:QUEStionable:INSTrument:CONDition?
Syntax :STATus:QUEStionable:INSTrument:CONDition?
Description This command returns the contents of the condition register of the
Questionable Status Register (bit 9), which reflects the state of the
instrument.
:STATus:QUEStionable:INSTrument:ENABle[?]
Syntax :STATus:QUEStionable:INSTrument:ENABle <NRf>
:STATus:QUEStionable:INSTrument:ENABle?
Description This command sets the bits in the event enable register that can generate
a summary bit used for the instrument state. The query returns the
weighted value of the bits that are set in the event enable register.
:STATus:QUEStionable:INSTrument[:EVENt]?
Syntax :STATus:QUEStionable:INSTrument[:EVENt]?
Description This command queries the contents of the Questionable Status event
register.
:STATus:QUEStionable:INSTrument:NTRansition[?]
Syntax :STATus:QUEStionable:INSTrument:NTRansition[?] <NRf>
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Questionable Status
Register structure. The query returns the weighted value of the bits that
are set to pass negative transitions in the transition filter.
To Next Page
Loading...
