Keysight Technologies J-BERT M8020A User Manual

160 Keysight M8070A Programming Guide
5 SCPI Command Reference
[:SOURce]:JITTer:HFRequency:BUNCorrelate:DRATe[?]
Syntax [:SOURce]:JITTer:HFRequency:BUNCorrelate:DRATe ‘identifier’
<RATE625|RATE1250|RATE2500>
[:SOURce]:JITTer:HFRequency:BUNCorrelate:DRATe? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataOut1', 'M*.DataOut2', or 'M*.DataOut'
<RATE625|RATE1250|RATE2500>: Set the bounded uncorrelated PRBS
data rate.
Return Range RATE625|RATE1250|RATE2500
Description This command sets the bounded uncorrelated PRBS data rate to 625
MBps, 1250 MBps, or 2500 MBps.
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A and
M8045A.
Example :JITT:HFR:BUNC:DRAT ‘M2.DataOut2’, RATE625
[:SOURce]:JITTer:HFRequency:BUNCorrelate:FILTer[:SELect][?]
Syntax [:SOURce]:JITTer:HFRequency:BUNCorrelate:FILTer[:SELect] ‘identifier’
<LP50|LP100|LP200>
[:SOURce]:JITTer:HFRequency:BUNCorrelate:FILTer[:SELect]? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataOut1', 'M*.DataOut2', or 'M*.DataOut’
<LP50|LP100|LP200>: Select the low-pass filter.
Return Range LP50|LP100|LP200
Description This command selects the low-pass filter for bounded uncorrelated jitter
(50, 100, or 200 MHz).
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A and
M8045A.
Example :JITT:HFR:BUNC:FILT ‘M2.DataOut2’, LP50

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English