266 Keysight M8070A Programming Guide
5 SCPI Command Reference
:N1000:CRECovery:CLBandwidth[?]
Syntax :N1000:CRECovery:CLBandwidth <identifier>,<bandwidth>
:N1000:CRECovery:CLBandwidth? <identifier>,
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
Description This command sets the fix loop bandwidth.
This query returns the present state.
This SCPI is applicable for M8046A.
Example :N1000:CREC:CLB "DCA1.SLOT1",10e6
For detailed documentation, see :CRECovery{n}:CLBandwidth in the
FlexDCA online help.
:N1000:CRECovery:CRATe[?]
Syntax :N1000:CRECovery:CRATe <identifier>,<data_rate>
:N1000:CRECovery:CRATe? <identifier>
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
Description This command sets the clock recovery’s symbol rate.
This query returns the present setting.
This SCPI is applicable for M8046A.
Example :N1000:CREC:CRAT "DCA1.SLOT1",28e9
For detailed documentation, see :CRECovery{n}:CRATe in the FlexDCA
online help.
:N1000:CRECovery:LBWMode[?]
Syntax :N1000:CRECovery:LBWMode <identifier>,{FIXed | RDEPendent}
:N1000:CRECovery:LBWMode? <identifier>
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
Description This command sets the loop bandwidth mode to either fixed or symbol rate
dependent.
To Next Page
Loading...
