Keysight M8070A Programming Guide 267
SCPI Command Reference 5
This query returns the present state.
This SCPI is applicable for M8046A.
Example :N1000:CREC:LBWM "DCA1.SLOT1",RDEP
For detailed documentation, see :CRECovery{n}:LBWMode in the FlexDCA
online help.
:N1000:CRECovery:LOCKed?
Syntax :N1000:CRECovery:LOCKed? <identifier>
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
Description This query displays the clock recovery’s lock status.
Response: 1 (for locked) or 0 (for unlocked)
This SCPI is applicable for M8046A.
Example :N1000:CREC:LOCK? "DCA1.SLOT1"
For detailed documentation, see :CRECovery{n}:LOCKed the FlexDCA
online help.
:N1000:CRECovery:LSELect[?]
Syntax :N1000:CRECovery:LSELect <identifier>,{LOOP1 | LOOP2 | LOOP3 |
LOOP4}
:N1000:CRECovery:LSELect? <identifier>,
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
Description This command selects the type 2 loop transition frequency.
This query returns the present state.
This SCPI is applicable for M8046A.
Example :N1000:CREC:LSEL "DCA1.SLOT1",LOOP1
For detailed documentation, see :CRECovery{n}:LSELect in the FlexDCA
online help.
To Next Page
Loading...
