Keysight Technologies J-BERT M8020A - Page 434

434 Keysight M8070A Programming Guide
5 SCPI Command Reference
:PLUGin:PSWEep:SHOW Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 86
:PLUGin:PSWEep:SHOW:SGLegends[?]
Syntax :PLUGin:PSWEep:SHOW:SGLegends 'Identifier', <0|1|ON|OFF>
:PLUGin:PSWEep:SHOW:SGLegends? 'Identifier'
Input
Parameters
Identifier: Specify the plugin name. For e.g. 'ParameterSweep1''
<0|1|OFF|ON>: Specify the show/hide state for graph legends.
Return Range 0|1
Description This command shows/hides the graph legends.
This query returns the current setting.
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A, M8045A
and M8046A.
Example :PLUG:PSWE:SHOW:SGL 'ParameterSweep1', 1
Name Description under
:SGLegends :PLUGin:PSWEep:SHOW:SGLegends[?] on page 434
:SMPoints :PLUGin:PSWEep:SHOW:SMPoints[?] on page 435
:VSCale :PLUGin:PSWEep:SHOW:VSCale[?] on page 435
:SGLegends[?]
:SMPoints[?]
:SHOW
:VSCale[?]