Sequencing 3
M8190A User’s Guide 101
3.6.2.3 Dynamic Select
The instrument provides a dynamic sequencing mode, which allows changing the
actually running segment or sequence without stopping and reprogramming the
instrument. The selected sequencer index is modified either by the external DYNAMIC
CONTROL input or via remote programming. Up to 512k sequencer table indices can be
addressed.
The run input is a software button or command, which switches the instrument from
programming mode to run mode.
3.6.3 Internal Trigger Generator
The M8190A provides a configurable internal trigger generator that allows for
generation of a periodic trigger signal that is frequency locked to the clock of the
sequencer engine.
3.6.4 Mapping External Inputs to Logical Functions
The logical functions controlling the sequencer can be connected to multiple sources.
The following table shows all possible mappings.
To Next Page
Loading...
