Keysight M8190A - Arm[:Sequence][:Start][:Layer]:Cdelay[1|2 Coarse_Delay>|Minimum|Maximum

8 General Programming
198 M8190A User’s Guide
8.8.3 :ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2][?]
<coarse_delay>|MINimum|MAXimum
Command
:ARM:CDEL[?]
Long
:ARM[:SEQuence][:STARt][:LAYer]:CDELay[1|2][?]
Parameters
<coarse_delay> | MINimum | MAXimum
Parameter Suffix
None
Description
Set or query the coarse delay settings. The unit is in seconds.
Example
Command
:ARM:CDEL 3e-9
Query
:ARM:CDEL?
Table 8-11: Coarse Delay Settings
Sample Frequency
Coarse Delay Range
Coarse Delay Resolution
f
Sa
≥ 6.25 GSa/s
0 .. 10e-9
10e-12
2.5 GSa/s ≤ f
Sa
< 6.25 GSa/s
0 .. 10e-9
20e-12
f
Sa
< 2.5 GSa/s
0 .. 10e-9
50e-12