Keysight M8190A - Source]:Carrier[1|2]:Frequency:integral Frequency_Integral>|Min|Max|Default

General Programming 8
M8190A User’s Guide 301
8.24.2 [:SOURce]:CARRier[1|2]:FREQuency:INTegral[?]
<frequency_integral>|MIN|MAX|DEFault
Command
CARR:FREQ:INT[?]
Long
:CARRier:FREQuency:INTegral[?]
Parameters
<frequency_integral> | MIN | MAX | DEF
Parameter Suffix
Hz
Description
Set or query the integral part of the carrier frequency used for interpolated modes.
 <frequency_integral> – Integral part of the carrier frequency (in Hz)
Example
Command
:CARR1:FREQ:INT 1e9
Query
:CARR1:FREQ:INT?