Keysight M8190A - Source]:Action[1|2]:Delete <Action_Sequence_Id

8 General Programming
310 M8190A User’s Guide
8.27.3 [:SOURce]:ACTion[1|2]:DELete <action_sequence_id>
Command
:ACT:DEL
Long
:ACTion:DELete
Parameters
<action_sequence_id>
Parameter Suffix
None
Description
<action-sequence-id> Id of the action sequence to be deleted
This command deletes an action sequence from the action table.
Example
Command
:ACT:DEL 1
8.27.4 [:SOURce]:ACTion[1|2]:DELete:ALL
Command
:ACT:DEL:ALL
Long
:ACTion:DELete:ALL
Parameters
None
Parameter Suffix
None
Description
This command deletes the complete action table.
Example
Command
:ACT:DEL:ALL