Keysight M8190A - Source]:Stable[1|2]:Scenario:count[?] <Count

8 General Programming
270 M8190A User’s Guide
Description
Set or query the advancement mode for scenarios.
Example
Command
:STAB:SCEN:ADV AUTO
Query
:STAB:SCEN:ADV?
8.21.14 [:SOURce]:STABle[1|2]:SCENario:COUNt[?] <count>
Command
:STAB:SCEN:COUN[?]
Long
:STABle:SCENario:COUNt[?]
Parameters
<count>
Parameter Suffix
None
Description
Set or query the loop count for scenarios.
<count> – 1..4G-1: number of times the scenario is repeated.
Example
Command
:STAB:SCEN:COUN 2
Query
:STAB:SCEN:COUN?
8.21.15 [:SOURce]:STABle[1|2]:STReaming[:STATe][?] 0|1|OFF|ON
Command
:STAB:STR[?]
Long
:STABle:STReaming[?]
Parameters
0|1|OFF|ON
Parameter Suffix
None