Keysight M8190A - Trigger[:Sequence][:Start]:Advance[1|2]:Hwdisable[:State 0|1|OFF|ON

General Programming 8
M8190A User’s Guide 211
8.8.21 :TRIGger[:SEQuence][:STARt]:ADVance[1|2]:HWDisable[:STATe][?]
0|1|OFF|ON
Command
:TRIG:ADV:HWD[?]
Long
:TRIGger:ADVance:HWDisable[?]
Parameters
0|1|OFF|ON
Parameter Suffix
None
Description
Set or query the hardware input disable state for the advancement function. When
the hardware input is disabled, an advancement event can only be generated using
the :TRIGger[:SEQuence][:STARt]:ADVance[1|2][:IMMediate] command. When the
hardware input is enabled, an advancement event can be generated by command or
by a signal present at the trigger or event input.
Example
Command
:TRIG:ADV:HWD 0
Query
:TRIG:ADV:HWD?