Keysight M8190A - Arm[:Sequence][:Start][:Layer]:Event:slope Positive|Negative|Either

General Programming 8
M8190A User’s Guide 207
8.8.16 :ARM[:SEQuence][:STARt][:LAYer]:EVENt:SLOPe[?] POSitive|NEGative|EITHer
Command
:ARM:EVEN:SLOP[?]
Long
:ARM:EVENt:SLOPe[?]
Parameters
POSitive|NEGative|EITHer
Parameter Suffix
None
Description
Set or query the event input slope.
POSitive – rising edge
NEGative – falling edge
EITHer – both
Example
Command
:ARM:EVEN:SLOP POS
Query
:ARM:EVEN:SLOP?