Use this tab to perform the functions such as importing, scaling, and resampling
waveform files in a variety of formats for their generation by the M8190A arbitrary
waveform generator. It provides the controls which allow the complete definition of
signal processing parameters for the waveform file format (see File Format).
Depending on the file format and contents, marker information can be extracted and
exported to the M8190A generator. Up to two markers can be supported and assigned
to the AWG Sample and Sync markers. Also depending on the file format and contents,
information regarding the original sampling rate and/or carrier frequency of the input
waveforms can be extracted and re-used within the import tool. Resampling is
performed so no images or aliases show up in the resampled waveform. The import tool
supports the generation of signals in both direct and up-converter modes of the
M8190A.
To Next Page
Loading...
