Keysight M8190A - 2.2 Launching the M8190 A Soft Front Panel

2 M8190A User Interface
34 M8190A User’s Guide
2.2 Launching the M8190A Soft Front Panel
There are three ways to launch the M8190A Soft Front Panel:
1. Select Start > All Programs > Keysight M8190 > Keysight M8190 Soft Front
Panel
2. From the Keysight Connection Expert select the discovered M8190A module,
press the right mouse key to open the context menu and select “Send
Commands To This Instrument”.
3. From the Keysight Connection Expert select the discovered M8190A module,
select the “Installed Software” tab and press the “Start SFP” button.
The following screen will appear:
Figure 2-1: M8190A connected to PC