Keysight M8190A - 6 Markers; 6.1 Introduction; 6.2 Sample Markers

Keysight M8190A – Arbitrary Waveform Generator
User’s Guide
6 Markers
6.1 Introduction / 159
6.2 Sample Markers / 159
6.3 Sync Markers / 162
6.1 Introduction
The instrument provides output signals with a defined timing relationship to the output
sample stream. These signals are called markers.
There are two different types of markers:
 Sample Markers
 Sync Markers
The details of these markers are explained in the sections that follow.
6.2 Sample Markers
Sample markers can be used to mark individual samples.
The following table shows the marker granularity:
Table 6-1: Marker granularity
Mode
Granularity in DAC Samples
High Speed (Option -12G)
48
High Precision (Option -14B)
40
INT_x3 (Option -DUC)
24
INT_x12 (Option -DUC)
24
INT_x24 (Option -DUC)
24
INT_x48 (Option -DUC)
48