Keysight M8190A - Trigger[:Sequence][:Start]:Begin[1|2]:Hwdisable[:State 0|1|OFF|ON

8 General Programming
210 M8190A User’s Guide
8.8.20 :TRIGger[:SEQuence][:STARt]:BEGin[1|2]:HWDisable[:STATe][?]
0|1|OFF|ON
Command
:TRIG:BEG:HWD[?]
Long
:TRIGger:BEGin:HWDisable[?]
Parameters
0|1|OFF|ON
Parameter Suffix
None
Description
Set or query the hardware input disable state for the trigger function. When the
hardware input is disabled, a trigger can only be generated using the
:TRIGger[:SEQuence][:STARt]:BEGin[1|2][:IMMediate] command. When the hardware
input is enabled, a trigger can be generated by command, by a signal present at the
trigger input or the internal trigger generator.
Example
Command
:TRIG:BEG:HWD ON
Query
:TRIG:BEG:HWD?