Keysight M8190A - 8.8:ARM;TRIGger Subsystem

8 General Programming
196 M8190A User’s Guide
8.8 :ARM/TRIGger Subsystem
8.8.1 :ABORt[1|2]
Command
:ABOR[1|2]
Long
:ABORt[1|2][?]
Parameters
None
Parameter Suffix
None
Description
Stops signal generation on channel. If channels are coupled, both channels are
stopped.
Example
Command
:ABOR1
8.8.2 :ARM[:SEQuence][:STARt][:LAYer]:DELay[1|2][?] <delay>|MINimum|MAXimum
Command
:ARM:DEL[?]
Long
:ARM[:SEQuence]|[STARt][:LAYer]:DELay[1|2][?]
Parameters
{<delay> | MINimum | MAXimum}
Parameter Suffix
HZ
Description
Specifies the frequency of the internal trigger period generator of the selected
channel. To select the internal trigger generator use :ARM:SOUR[1|2] INT2