Keysight M8190A - Trigger[:Sequence][:Start]:Begin[1|2][:Immediate]

General Programming 8
M8190A User’s Guide 213
8.9.3 :TRIGger[:SEQuence][:STARt]:BEGin[1|2][:IMMediate]
Command
:TRIG:BEG
Long
:TRIGger:BEGin
Parameters
None
Parameter Suffix
None
Description
In triggered mode send the start/begin event to a channel.
Example
Command
:TRIG:BEG
8.9.4 :TRIGger[:SEQuence][:STARt]:BEGin[1|2]:GATE[:STATe][?] OFF|ON|0|1
Command
:TRIG:BEG:GATE[?]
Long
:TRIGger:BEGin:GATE[?]
Parameters
OFF|ON|0|1
Parameter Suffix
None
Description
In gated mode send a “gate open” (ON|1) or “gate close” (OFF|0) to a channel.
Example
Command
:TRIG:BEG:GATE ON
Query
:TRIG:BEG:GATE?