Keysight M8190A - Source]:Carrier[1|2]:Frequency:fractional Frequency_Fractional>|Min|Max|Default

8 General Programming
302 M8190A User’s Guide
8.24.3 [:SOURce]:CARRier[1|2]:FREQuency:FRACtional[?]
<frequency_fractional>|MIN|MAX|DEFault
Command
CARR:FREQ:FRAC[?]
Long
:CARRier:FREQuency:FRACtional[?]
Parameters
<frequency_fractional> | MIN | MAX | DEF
Parameter Suffix
Hz
Description
Set or query the fractional part of the carrier frequency used for interpolated modes.
 <frequency_fractional> – Fractional part of the carrier frequency.
Example
Command
:CARR1:FREQ:FRAC 1e-9
Query
:CARR1:FREQ:FRAC?
8.24.4 [:SOURce]:CARRier[1|2]:SCALe[?] <scale>|MINimum|MAXimum|DEFault
Command
CARR:SCAL[?]
Long
:CARRier:SCALe[?]
Parameters
<scale> | MIN | MAX | DEF
Parameter Suffix
None
Description
Set or query the amplitude scale used for interpolated modes.