An Offset value is provided after programming. The rising edge of the gate starts the
scenario and plays the scenario infinitely until receiving the falling edge of the gate.
After having received the falling edge of the gate, the scenario is played for a number of
times specified by the scenario loop count. Then the scenario is stopped at its end. Then
the last sample value is provided.
The following segment/sequence advancement modes are available:
Auto
Conditional (Advancement Event)
Repeat (Advancement Event)
Single (Advancement Event)
After programming, the scenario is started automatically and the first sequence is
played repetitively until receiving an Enable. Then the first sequence is played until the
end and the scenario is continued
The following segment/sequence advancement modes are available:
Auto
Conditional (Advancement Event)
Repeat (Advancement Event)
Single (Advancement Event)
The following scenario advancement mode is available:
The scenario is played infinitely until being stopped. After being restarted, the first
sequence is played until it receives an enable.
To Next Page
Loading...
