Keysight M8190A - Page 13

Contents
M8190A User’s Guide 13
8.22.22 :TRACe[1|2]:ADVance[?]
AUTO|CONDitional|REPeat|SINGle 295
8.22.23 :TRACe[1|2]:COUNt[?] <count> 296
8.22.24 :TRACe[1|2]:MARKer[:STATe][?] OFF|ON|0|1 296
8.23 :TEST Subsystem 298
8.23.1 :TEST:PON? 298
8.23.2 :TEST:TST? 298
8.24 CARRier Subsystem 300
8.24.1 [:SOURce]:CARRier[1|2]:FREQuency[?]
<frequency_integral>[,<frequency_fractional>]|DEFault 300
8.24.2 [:SOURce]:CARRier[1|2]:FREQuency:INTegral[?]
<frequency_integral>|MIN|MAX|DEFault 301
8.24.3 [:SOURce]:CARRier[1|2]:FREQuency:FRACtional[?]
<frequency_fractional>|MIN|MAX|DEFault 302
8.24.4 [:SOURce]:CARRier[1|2]:SCALe[?]
<scale>|MINimum|MAXimum|DEFault 302
8.24.5 [:SOURce]:CARRier[1|2]: POFFset [?] <phase- offset>
|MINimum|MAXimum|DEFault 303
8.25 :FTABle Subsystem 304
8.25.1 [:SOURce]:FTABle[1|2]:DATA[?] <frequency_table_index>,
(<length>|<block>|<frequency_integral_part>,
<frequency_fractional_part >…) 304
8.25.2 [:SOURce]:FTABle[1|2]:RESet 305
8.26 :ATABle Subsystem 305
8.26.1 [:SOURce]:ATABle[1|2]:DATA[?] <amplitude_table_index>,
(<length>|<block>|<amplitude_scale>,
<amplitude_scale>…) 305
8.26.2 [:SOURce]:ATABle[1|2]:RESet 306
8.27 :ACTion Subsystem 307
8.27.1 [:SOURce]:ACTion[1|2]:DEFine[:NEW]? 307
8.27.2 [:SOURce]:ACTion[1|2]:APPend
<action_sequence_index>,<action>[,<value> [,<value>]] 308
8.27.3 [:SOURce]:ACTion[1|2]:DELete <action_sequence_id> 310
8.27.4 [:SOURce]:ACTion[1|2]:DELete:ALL 310
9 Example Programs and Files
10 Characteristics
10.1 Performance Specification 313
10.2 General 313
11 Appendix
11.1 Resampling Algorithms for Waveform Import 315
11.1.1 Resampling Requirements 315
11.1.2 Resampling Methodology 316
11.1.3 Resampling Modes 318