Keysight M8190A - 8 General Programming

Keysight M8190A – Arbitrary Waveform Generator
User’s Guide
8 General Programming
8.1 Introduction / 170
8.2 IVI-COM Programming / 171
8.3 SCPI Programming / 172
8.4 Programming Recommendations / 175
8.5 System Related Commands (SYSTem Subsystem) / 176
8.6 Common Command List / 183
8.7 Status Model / 186
8.8 :ARM/TRIGger Subsystem / 196
8.9 TRIGger - Trigger Input / 212
8.10 :FORMat Subsystem / 215
8.11 :INSTrument Subsystem / 216
8.12 :MMEMory Subsystem / 220
8.13 :OUTPut Subsystem / 227
8.14 Sampling Frequency Commands / 232
8.15 Reference Oscillator Commands / 236
8.16 :DAC|DC|AC Subsystem / 238
8.17 :VOLTage Subsystem / 241
8.18 :MARKer Subsystem / 245
8.19 [:SOURce]:FUNCtion[1|2]:MODE ARBitrary|STSequence|STSCenario / 250
8.20 :SEQuence Subsystem / 251
8.21 :STABle Subsystem / 259
8.22 :TRACe Subsystem / 272
8.23 :TEST Subsystem / 298
8.24 CARRier Subsystem / 300
8.25 :FTABle Subsystem / 304
8.26 :ATABle Subsystem / 305
8.27 :ACTion Subsystem / 307