Keysight M8190A - Page 280

8 General Programming
280 M8190A User’s Guide
Parameters
WSPeed|WPRecision|INTX3|INTX12|INTX24|INTX48
 WSPeed – speed mode, 12 bit DAC resolution
 WPRecision – precision mode, 14 bit DAC resolution
 INTX3 – interpolation x3 mode
 INTX12 – interpolation x12 mode
 INTX24 – interpolation x24 mode
 INTX48 – interpolation x48 mode
Parameter Suffix
None
Description
Use this command or query to set or get the waveform output mode. If the DAC
resolution is changed in direct mode or if there is a switch from direct mode to
interpolated mode or vice versa, all waveform segments for this channel are
invalidated.
The interpolated modes INTX3, INTX12, INTX24 and INTX48 are only available when
the DUC option is installed.
Example
Command
:TRAC:DWID INTX3
Query
:TRAC:DWID?