EasyManua.ls Logo

Keysight M8190A - CustomModulationFiles; MATLAB; N7617 B Signal Studio WLAN; VISA Examples

Keysight M8190A
320 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Example Programs and Files
312 M8190A User’s Guide
Decsription
This directory contains example custom modulation files to be used in the SFP Complex Modulation Panel.
example applications were created to demonstrate the waveform generation capabilities of these instruments, along
with the value of using these instruments together with MATLAB software.
This directory contains an Agilent N761B Signal Studio WLAN example waveform file and a corresponding M8190A
instrument setting.
This includes the following VISA examples:
VISA_CPP_Example
VISA-COM_CS_Duc_Example
VISA-COM_CS_Example
VISA-COM_CS_Extended_Example
VISA-COM_VB_Example
VISA-COM_VB_Extended_Example
This folde contains example waveform data files in different formats.
Sin1MHzAt7p68GHz.*
These files contain one period of a 1MHz baseband signal at a sample rate of 7.68GHz. They can be
imported and played in direct mode.
SinDelta10MHzAt2p4GHz_INTX3.*
These files contain one period of a 10MHz signal sampled at 2.4GHz as IQ sample pairs. If imported and
played in interpolated mode with an interpolation factor of 3 and a DAC sample rate of 7.2GHz, a sine
signal with a frequency offset of 10MHz to the carrier frequency is generated.
SinDelta10MHzAt600MHz_INTX12.*
These files contain one period of a 10MHz signal sampled at 600MHz as IQ sample pairs. If imported
and played in interpolated mode with an interpolation factor of 12 and a DAC sample rate of 7.2GHz, a
sine signal with a frequency offset of 10MHz to the carrier frequency is generated.
SinDelta10MHzAt300MHz_INTX24.*
These files contain one period of a 10MHz signal sampled at 300MHz as IQ sample pairs. If imported
and played in interpolated mode with an interpolation factor of 24 and a DAC sample rate of 7.2GHz, a
sine signal with a frequency offset of 10MHz to the carrier frequency is generated.
SinDelta10MHzAt150MHz_INTX48.*
These files contain one period of a 10MHz signal sampled at 150MHz as IQ sample pairs. If imported
and played in interpolated mode with an interpolation factor of 48 and a DAC sample rate of 7.2GHz, a
sine signal with a frequency offset of 10MHz to the carrier frequency is generated.

Table of Contents

Related product manuals