Keysight N6705C - Page 28

FORMat
[:DATA] ASCII | REAL Specifies the format of the returned data.
:BORDer NORMal | SWAPped Specifies how binary data is transferred.
HCOPy
:SDUMp
:DATA? Returns an image of the front panel display.
:DATA
:FORMat BMP|GIF|PNG Specifies the format for front panel images returned
IEEE 488.2 Common Commands
*CLS Clears status.
*ESE<value> Sets standard event status enable.
*ESR? Returns event status register.
*IDN? Returns instrument identification.
*OPC Enables "operation complete" bit in ESR.
*OPC? Returns a 1 when all pending operations complete.
*OPT? Returns option number.
*RCL<value> Recalls a saved instrument state.
*RDT? Returns output channel descriptions.
*RST Resets the instrument.
*SAV<value> Saves an instrument state.
*SRE <value> Sets service request enable register.
*STB? Returns the status byte.
*TRG Generates a trigger.
*TST? Performs a selftest, then returns results.
*WAI Pauses additional command processing until all device commands are done.
INITiate
[:IMMediate]
:ACQuire (@chanlist) Initiates the measurement trigger system.
:DLOG <"filename"> Initiates internal data logging.
:ELOG (@chanlist) Initiates external data logging.
:HISTogram (@chanlist) Initiates histogram measurements. (only on N6781A/82A/85A/86A)
:TRANsient (@chanlist) Initiates the transient trigger system.
:CONTinuous
:TRANsient 0|OFF|1|ON, (@chanlist) Continuously initiates the transient trigger system.
LXI
:IDENtify
[:STATe] 0|OFF|1|ON Turns the front panel LXI identify indicator on or off.
:MDNS
[:STATe] 0|OFF|1|ON Controls the state of the mDNS server.
1 Quick Reference
28 Keysight N6705C Operating and Service Guide