Keysight N6705C - Page 31

:MARKer<1|2>
:POINt <value> Positions the data log markers
:OFFSet <value> Sets trigger offset as a percent from start of data log duration.
:PERiod <value> Sets the interval between samples (replaces TINTerval).
:TIMe <value> Sets the duration of the internal data log in seconds
:TINTerval <value> Sets the interval between samples (for backward compatibility)
:VOLTage
[:DC]
:RANge
[:UPPer] <value>, (@chanlist) Selects the internal data log voltage measurement range.
:AUTO 0|OFF|1|ON, (@chanlist) Enables/disables seamless measurement autoranging. (N6781A, N6782A)
:ELOG
:CURRent
[:DC]
:RANge
[:UPPer] <value>, (@chanlist) Selects the external data log current measurement range.
:AUTO 0|OFF|1|ON, (@chanlist) Enables/disables seamless Elog measurement autoranging.
(only on N6781A/82A/85A/86A)
:FUNCtion
:CURRent 0|OFF|1|ON, (@chanlist) Enables/disables current data logging.
:MINMax 0|OFF|1|ON, (@chanlist) Enables/disables min/max current data logging.
:VOLTage 0|OFF|1|ON, (@chanlist) Enables/disables voltage data logging.
:MINMax 0|OFF|1|ON, (@chanlist) Enables/disables min/max voltage data logging.
:PERiod <value>, (@chanlist) Sets the integration time of the external data log measurement.
:VOLTage
[:DC]
:RANge
[:UPPer] <value>, (@chanlist) Selects the external data log voltage measurement range.
:AUTO 0|OFF|1|ON, (@chanlist) Enables/disables seamless Elog measurement autoranging. (N6781A, N6782A)
:FUNCtion <"function">, (@chanlist) Selects the measurement function (for backward compatibility)
:CURRent 0|OFF|1|ON, (@chanlist) Enables/disables current measurements (replaces FUNCtion)
:VOLTage 0|OFF|1|ON, (@chanlist) Enables/disables voltage measurements (replaces FUNCtion)
:INPut <MAIN|AUXiliary>, (@chanlist) Selects the voltage measurement input. (only on N6781A, N6785A)
:HISTogram
:CURRent (HISTogram commands only apply to models N6781A/82A/85A/86A)
[:DC]
:BIN
:GAIN? 8|0.0039, (@chanlist) Queries the LSB of the histogram in amperes per bin
:OFFSet? 8|0.0039, (@chanlist) Queries the weight of the histogram in amperes
:RANGes? (@chanlist) Queries the values of the bin ranges
:RANge
[:UPPer] <value>, (@chanlist) Selects the internal data log voltage measurement range.
:AUTO 0|OFF|1|ON, (@chanlist) Enables/disables seamless Elog measurement autoranging.
:FUNCtion
Keysight N6705C Operating and Service Guide 31
1 Quick Reference