Keysight N6705C - Page 33

:END
[:LEVel] <value>, (@chanlist) Sets the end level of the ramp
:TIMe <value>, (@chanlist) Sets the length of the end time
:RTIMe <value>, (@chanlist) Sets the rise time of the ramp
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the ramp
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:SINusoid
:AMPLitude <value>, (@chanlist) Sets the amplitude of the sine wave
:FREQuency <value>, (@chanlist) Sets the frequency of the sine wave
:OFFSet <value>, (@chanlist) Sets the DC offset of the sine wave
:STAIRcase
:END
[:LEVel] <value>, (@chanlist) Sets the end level of the staircase
:TIMe <value>, (@chanlist) Sets the length of the end time
:NSTeps <value>, (@chanlist) Sets the number of steps in the staircase
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the staircase
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TIMe <value>, (@chanlist) Sets the length of the staircase
:STEP
:END
:TIMe <value>, (@chanlist) Sets the end level of the step
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the step
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TRAPezoid
:END
:TIMe <value>, (@chanlist) Sets the length of the end time
:FTIMe <value>, (@chanlist) Sets the length of the fall time
:RTIMe <value>, (@chanlist) Sets the length of the rise time
:STARt
[:LEVel] <value>, (@chanlist) Sets the initial level of the trapezoid
:TIMe <value>, (@chanlist) Sets the length of the start time or delay
:TOP
[:LEVel] <value>, (@chanlist) Sets the top level of the trapezoid
:TIMe <value>, (@chanlist) Sets the length of the top of the trapezoid
:UDEFined
:BOSTep
[:DATA] <Bool>{,<Bool>}, (@chanlist) Generate triggers at the Beginning Of STep
:POINts? (@chanlist) Returns the number of BOST points
:DWELl <value>, {<value>}, (@chanlist) Sets the user-defined dwell values
:POINts? (@chanlist) Returns the number of dwell points
:LEVel <value>, {<value>}, (@chanlist) Sets the user-defined level values
Keysight N6705C Operating and Service Guide 33
1 Quick Reference