2 User Interface
2.17 View Editor
View” (if you exit the measurement without saving the edited View, the instrument
will save it for you as a User View called “Autosaved”).
If you clone the current Screen by pressing the “+” tab, the modified Predefined
View will be saved as a User View called “Autosaved”, and it will be available in the
new Screen.
2.17.4 To Save a User View
See also "Transferring User Views Between Instruments" on page 172
To save your new View as a User View, tap the “Save Layout as New View” control.
You will get an alpha keyboard that lets you name your new View; the default is the
old View name with a number. Below, we have typed in “My New View”:
When you tap “Done”, the View is saved:
Vector Modulation Analyzer Mode User's &Programmer's Reference 170
To Next Page
Loading...
