To Next Page

To Previous Page

6 Input/Output

6.2 Input

6.2.22.5 I/Q Cable Calibration Time (Remote Query Only)

Returns the last date and time that the I/Q Cable Calibration was performed for a

specific port.

Remote

Command

:CALibration:IQ:FLATness:I|IBAR|Q|QBAR:TIME?

Example

:CAL:IQ:FLAT:I:TIME?

Notes Returns 6 integer values: year, month, day, hour, minute, second. When no calibration has been

performed, all values are 0

Annunciation Guided Calibration, Cable Calibration, Last Calibration

6.2.23 Audio Input Channel

Determines which Audio Input to be used for audio measurements.

Remote Command

[:SENSe]:FEED:AFINput:PORT CH1 | CH2

[:SENSe]:FEED:AFINput:PORT?

Example

:FEED:AFIN CH1

Dependencies Only appears in Radio Test Mode

Only appears in modular products, and only if an M9260A Audio Analyzer module is installed

Preset Unaffected by Mode Preset, but set to Channel 1 by Input/Output Preset

6.2.24 Audio Calibrator

Lets you turn on the internal calibrator in the X-Series Audio board.

Remote Command

[:SENSe]:FEED:AFALign OFF | REF10

[:SENSe]:FEED:AFALign?

Example

:FEED:AFAL REF10

Dependencies Only appears in Measuring Receiver Mode’s Audio Measurements when Option 107 is present

Preset

OFF

6.2.25 Audio Coupling

Lets you set AC or DC coupling for the currently selected audio input.

Remote Command

[:SENSe]:AFINput[1]|2:COUPling AC | DC

[:SENSe]:AFINput[1]|2:COUPling?

Vector Modulation Analyzer Mode User's &Programmer's Reference 2186

Keysight N9010B Programmer's Reference

Other manuals for Keysight N9010B