Keysight N9010B - RF Lowband Path Block Diagram

3 VMA Mode
3.1 Digital Demod Measurement
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:PHASe:ROTation:SODD?
Example
:DDEM:SEGM1:CIQ:PHAS:ROT:SODD ON
:DDEM:SEGM1:CIQ:PHAS:ROT:SODD?
Preset
OFF
State Saved Yes
Differential
Enables or disables the differential encoding for the segment. This should only be
enabled for the BPSK, QPSK and 8PSK constellations.
Remote
Command
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:DIFFerential:STATe OFF | ON | 0 | 1
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:DIFFerential:STATe?
Example
:DDEM:SEGM1:CIQ:DIFF:STAT ON
:DDEM:SEGM1:CIQ:DIFF:STAT?
Couplings When Offset is ON, this control is OFF
Preset
OFF
State Saved Yes
Offset
Enables or disables an IQ offset by half the symbol time. This should only be enabled
for the QPSK constellation.
Remote
Command
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:OFFSet:STATe OFF | ON | 0 | 1
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:OFFSet:STATe?
Example
:DDEM:SEGM1:CIQ:OFFS:STAT ON
:DDEM:SEGM1:CIQ:OFFS:STAT?
Couplings When Differential is ON, this control is OFF
Preset
OFF
State Saved Yes
Insert Pilot
Enables or disables insertion of pilot (with repeated patten) to data segment.
Remote
Command
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:PILot ON | OFF | 1 | 0
[:SENSe]:DDEMod:SEGMent1|…|6:CIQ:PILot?
Example
:DDEM:SEGM1:CIQ:PIL ON
357 Vector Modulation Analyzer Mode User's &Programmer's Reference