Keysight N9010B - Page 2383

7 Save/Recall/Print
7.3 Save
–
RFBurst Trigger Level Abs
–
RFBurst Trigger Level Rel
–
RFBurst Trigger Level Type
–
RFBurst Trigger Slope
–
Scale/Div
–
Spurious Report Mode
–
SpurRangeStartFrequencyArray (columns A thru K)
–
SpurRangeStopFrequencyArray (columns A thru K)
–
Sweep Time (columns A thru K)
–
Sweep Time Mode (columns A thru K)
–
Trigger Holdoff
–
Trigger Holdoff State
–
TriggerSource
–
Video BW (columns A thru K)
–
Video BW Mode (columns A thru K)
The data above is followed in the file by a line containing “MeasResult1” to
“MeasResult42”. This line forms a header for each set of measurement results,
which appear in subsequent lines. Each line of Measurement Results consists of 42
comma-separated values, from the MeasResult1 value to the MeasResult42 value.
The MeasResult1 set in the file corresponds to the data returned by
MEAS/READ/FETCh:SPURious1; the MeasResult2 set corresponds to the data
returned by MEAS/READ/FETCh:SPURious2, and so on.
The exported file is in CSV format, with a .csv extension.
Meas Results File Example
When imported into Excel, a typical Meas Results file will show the header
information above followed by the data. A sample of what the data rows look like
appears below. Only the columns for Meas Result 1 through 6 are shown, due to
lack of space:
MeasResult
1
MeasResult
2
MeasResult
3
MeasResult
4
MeasResult
5
MeasResult
6
19 -80.27209 -80.87862 -90.94577 -89.27086 -76.77856
Vector Modulation Analyzer Mode User's &Programmer's Reference 2383