Keysight Truevolt Series User Manual

Monitor DMM
When the main page is set to Observe Only mode, this window opens showing a textual display of DMM
readings, secondary measurements (if enabled), and statistics. In Allow Full Control mode, the Clear All
and, if applicable, Clear Peaks buttons become active:
In Allow Full Control mode, to view data as shown on the instrument's graphical display (trend chart, his-
togram, and so on), click the Graphics Display radio button and click Get Display Image to update the
graphical display:
View Data
For both the Observe Only and Allow Full Control modes, this window keeps a running display of Read-
ings in Memory and has these active controls:
Features and Functions
154
Keysight Truevolt Series Operating and Service Guide

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English