Keysight Truevolt Series - Page 357

[SENSe:]TEMPerature Subsystem
This subsystem configures temperature measurements.
Command Summary
[SENSe:]TEMPerature:APERture
[SENSe:]TEMPerature:APERture:ENABled
[SENSe:]TEMPerature:NPLC
[SENSe:]TEMPerature:NULL[:STATe]
[SENSe:]TEMPerature:NULL:VALue
[SENSe:]TEMPerature:NULL:VALue:AUTO
[SENSe:]TEMPerature:SECondary
[SENSe:]TEMPerature:TRANsducer:{FRTD|RTD}:OCOMpensated
[SENSe:]TEMPerature:TRANsducer:{FRTD|RTD}:POWer:LIMit[:STATe]
[SENSe:]TEMPerature:TRANsducer:{FRTD|RTD}:RESistance[:REFerence]
[SENSe:]TEMPerature:TRANsducer:{FTHermistor|THERmistor}:POWer:LIMit[:STATe]
[SENSe:]TEMPerature:TRANsducer:{FTHermistor|THERmistor}:TYPE
[SENSe:]TEMPerature:TRANsducer:TCouple:CHECk
[SENSe:]TEMPerature:TRANsducer:TCouple:RJUNction
[SENSe:]TEMPerature:TRANsducer:TCouple:RJUNction:OFFSet:ADJust
[SENSe:]TEMPerature:TRANsducer:TCouple:RJUNction:TYPE
[SENSe:]TEMPerature:TRANsducer:TCouple:TYPE
[SENSe:]TEMPerature:TRANsducer:TYPE
[SENSe:]TEMPerature:ZERO:AUTO
SCPI Programming Reference
358
Keysight Truevolt Series Operating and Service Guide