Kinco FD5 Series - 6.5 Pulse mode (-4)

Kinco FD5 AC series servo driver user manual
Chatper 6 Operation mode introduction
94
Figure 6-19 Battery box disassembly method
Note
 The battery must be used within a limited temperature range, away from high temperature
and humidity, and free of dust and inflammable and explosive substances.
 The battery must be used within a limited temperature range, away from high temperature
and humidity, and free of dust and inflammable and explosive substances.

Do not impact or squeeze batteries during transportation and assembly to avoid battery
damage.

If the battery cable is placed for a long time, check whether the battery has expanded shell
before use.
 Do not short-circuit the positive and negative terminals of the battery; otherwise, the
battery may burst.
 The battery is disposable. Do not charge the battery.

Batteries must be discarded according to local regulations.
Table 6-29 Battery Specifications
Battery name
Lithium thionyl chloride battery
Model
Maxell ER6C WK P
Standard voltage
3.6V
Standard capacity
1800mH
Maximum Output Current
100uA
Weight
14.5g
Storage temperature
-20℃~85℃