Appendices
253
Program bank I-F contains program data for the MOSS tone
generator. Load this data into MOSS tone generator pro-
gram bank I-F of the TRITON-Rack.
Combination bank I-B (000...063) contains combinations that
use the bank I-F programs. Load this data into any combina-
tion bank I-E or E-A–E-H of the TRITON-Rack.
The remaining program banks I-A, I-B, I-C, I-D, combination
banks I-A, I-C, I-D, drum kits, arpeggio patterns, global set-
tings, and cue list is data for the TRITON.
When loading the MOSS.PCG file into the TRITON-
Rack, you must be sure to load only the data for Pro-
gram Bank I-F and Combination Bank I-B. If you load
any other data, the preloaded data of the TRITON-Rack
will be overwritten. When you load MOSS.SNG, the
Cue List will not be loaded into the TRITON-Rack.
Loading from the included floppy disk
How to load the bank I-F programs
1 Insert the “MOSS00FD” floppy disk into the disk drive.
2 Press the [DISK] key to enter Disk mode.
The following display will appear in the LCD screen.
3 Select “Bank I-F” (bank I-F programs).
Use the [ ], [ ] keys to select “MOSS.PCG,” and press
the [F6] (“OPEN”) key to open the file. In the same way,
select “Bank I-F” within “Programs.”
4 Press the [F8] (“UTILITY”) key to access the utility menu,
press the [F7] key to choose “Load Selected,” and press
the [F8] (“OK”) key.
The Load Program Bank F dialog box will appear.
5 Press the [F8] (“OK”) key.
Only the program data of bank I-F from the
“MOSS00FD” floppy disk will be loaded into program
bank I-F of the TRITON-Rack.
How to load the bank I-B combinations
Here’s how to load the data into combination bank I-E.
1 If you have modified the program settings or the order of
banks I-A or I-B, load banks I-A and I-B from the disk
included with the TRITON-Rack. The EXB-MOSS combi-
nations I-B use bank I-F programs as well as the pre-
loaded program banks I-A and I-B. This means that if
you load EXB-MOSS combinations I-B, you must also
load the preloaded program banks I-A and I-B. (☞BG
p.81 “Loading data”)
2 Use the [ ], [ ] keys to select “Combinations,” and
press the [F6] (“OPEN”) key.
3 Use the [ ], [ ] keys to select “Bank I-B.”
4 Press the [F8] (“UTILITY”) key to access the utility menu,
press the [F7] key to choose “Load Selected,” and press
the [F8] (“OK”) key.
The Load Combination Bank I-B dialog box will appear.
5 Use the [INC], [DEC] keys to select Bank I-E for “To.”
In consideration for loading the preloaded data and
EXB-PCM series data, we recommend that you load
this data into bank I-E.
6 Press the [F8] (“OK”) key.
Only the bank I-B combination data from the
“MOSS00FD” disk will be loaded into bank I-E of the
TRITON-Rack.
How to load MOSS.SNG into the demo song
MOSS.SNG is a song file that uses the programs of bank I-F,
etc. On the TRITON-Rack, you can load a song file as a
demo song, and play it using Demo/SNG.
When you load MOSS.SNG, all of the previous demo or
multi memory will be overwritten and lost.
1 Perform steps 1–2 of “How to load the bank I-F pro-
grams.”
2 Use the [ ], [ ] keys to select “MOSS.SNG.”
3 Press the [F8] (“UTILITY”) key to access the utility menu,
press the [F7] key to select “Load to Demo Song,” and
press the [F8] (“OK”) key.
The following dialog box will appear.
4 If you wish to load the data, press the [F8] (“OK”) key.
The demo song will be loaded from the “MOSS00FD”
disk into the TRITON-Rack.
5 Press the [DEMO/SNG] key to enter the DEMO/SNG
page, and press the [F5] (“START”) key to play back the
demo song.
To Next Page
Loading...
