Kyocera TASKalfa 2550ci - Displaying Fuser Heater Temperature; Turning All Leds on

2MV
1-3-79
U199
Displaying fuser heater temperature
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The current setting is displayed.
Completion
Press the stop key. The screen for selecting a maintenance mode No. is displayed.
U200 Turning all LEDs on
Description
Turns all the LEDs on the operation panel on.
Purpose
To check if all the LEDs on the operation panel light.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key.All the LEDs on the operation panel light.
4. Press the stop key. The LEDs turns off.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Fix Press
Press roller center temperature (°C)
Fix Edge
Heat roller edge temperature (°C)
Fix Center
Heat roller center temperature (°C)