2MV
1-3-84
U206 Setting the presence or absence of a coin vender
Description
Sets the presence or absence of the optional coin vender.
This is an optional device which is currently supported only by Japanese specification machines.
Purpose
To run this maintenance item if a coin vender is installed.
Method
1. Press the start key.
2. Select the item to be set.
Setting: [On/Off Config]
1. Select On or Off.
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [No Coin Action]
1. Select the item.
Initial setting: Off
2. Press the start key. The setting is set.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [Price]
1. Select the item to be set.
Item No. Description
Display Description
On/Off Config Sets the presence or absence of the coin vender
No Coin Action Behavior when change runs out during copying
Price Charge per copy by size and color
Boot Mode Setting the starting mode
Display Description
On The coin vender is installed
Off The coin vender is not installed
Display Description
All Clear All clear is performed
Auto Clear Auto clear is performed
Off Clear is not performed
Display Description
Normal
Normal
AD
Advertising copy
Print
Printing division money
To Next Page
Loading...
