2MV
1-3-87
U221 Setting the USB host lock function
Description
Specifies ON/OFF the USB host lock function. Setting this to ON causes the machine to be
unable to recognize the device connected to the USB host.
Purpose
Set according to the preference of the user.
Method
1. Press the start key.
2. Select [Host Lock].
3. Select On or Off.
Initial setting: Off
4. Press the start key. The setting is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U222 Setting the IC card type
Description
Sets the type of IC card.
Purpose
To change the type of IC card.
Setting
1. Press the start key.
2. Select the item.
* : Initial setting: Other
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
On USB host lock function ON
Off USB host lock function OFF
Display Description
Other The type of IC card is SSFC.
SSFC The type of IC card is not SSFC.
To Next Page
Loading...
