Kyocera TASKalfa 2550ci - Wire Saddle a

2MV
1-2-32
13. Attaches four wire saddle to the
controller box and four wire saddle to
the IH box cover.
Then release the hook of all wire
saddles.
14. Release the hook of wire saddle A
(standard).
Figure 1-2-43
15. Remove two screws and then remove
the ISU rear cover.
Figure 1-2-44
Wire saddle A (standard)
Wire saddles A
Wire saddles A
Controller box
IH box cover
Screw
ISU rear cover
Screw