2MV
1-3-12
(3) Contents of the maintenance mode items
Item No. Description
U000 Outputting an own-status report
Description
Outputs lists of the current settings of the maintenance items and paper jam and service call
occurrences. Outputs the event log. Also sends output data to the USB memory.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.
Method:Outputs the report
1. Press the start key.
2. Select the item to be output.
3. Select [Print].
4. Press the start key. A list is output.
When A4/Letter paper is available, a report of this size is output. If not, specify the paper feed
location.
The output status is displayed.
Display Output list
Maintenance
List of the current settings of the maintenance modes
User Status
Outputs the user status page
Service Status
Outputs the service status page
Event
Outputs the event log
Network Status
Outputs the network status page
All
Outputs the all reports
Display Description
--- During output standby
Active During output process
OK Output process completion
To Next Page
Loading...
