2MV
1-3-81
U202 Setting the KMAS host monitoring system
Description
Initializes or operates the KMAS host monitoring system.
This is an optional device which is currently supported only by Japanese specification machines,
so no setting is necessary.
Purpose
Performed at installation, periodic maintenance, and/or repair.
Method
1. Press the start key.
2. Select the item.
Method: [Init/Set TEL No.]
1. Select the item to be input.
2. Input the telephone number using the numeric keys.
3. Press the start key. The setting is set.
4. Select [Initialize].
5. Select [Execute].
6. Press the start key. Communication with the host initiated.
7. The result of communication will be displayed. (Refer to the result.)
Method: [Call Service End]
1. Select [Execute].
2. Press the start key. Communication with the host initiated.
3. The result of communication will be displayed. (Refer to the result.)
Result table
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Init/Set TEL No. Initialization/Phone Nbr. se
Call Service End Outgoing at the end of service activities
Display Description
TEL No. 1 Sales companies
TEL No. 2 Call center
Display Description
OK Communication properly terminated.
NG
Communication error (Nbr. of calls exceeded)
Communication error (Communication timeout)
Communication error (Communication trial timeout)
Communication error (Other)
KMAS unreachable
To Next Page
Loading...
