Kyocera TASKalfa 2550ci - Install Original Panel Display

2MV
1-3-89
U224 Install original panel display
Description
Changes the image data and the message of the opening screen at the machine startup and the
image data and the message of the service call screen to user specified data.
Purpose
Set according to the preference of the user.
Setting
1. Write the image data or the message data to the USB memory.
2. Insert USB memory in USB memory slot of the machine.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the [Install] or [UnInstall].
7. Select the item.
8. Press the start key. Installation or uninstallation is started.
9. When normally completed, [OK] is displayed.
Supplement 1
File information
Item No. Description
Display Description
Install Installs the image data or the message data
UnInstall Restores the original image data or message data
Display Description Display area
Opening Img Startup screen Entire start display
Call Img Service call screen Graphic display area
Call Msg Top Service call message 1 Message display area (top)
Call Msg Detail Service call message 2 Message display area (descriptive area)
Description File name Image size (in pixels) File format
Startup screen opening_ext_image.png Length: 480
Width : 800
PNG
Service call
screen
callwin_ext_image.png Length: 200
Width : 180
PNG
Service call
message 1
callwin_ext_mes_top.txt - TEXT
(Unicode)
Service call
message 2
callwin_ext_mes_detail.txt - TEXT
(Unicode)