2MV-9
1-3-2
(2) Maintenance modes item list
Section
Item
No.
Content of maintenance item
Initial
setting
General U000 Outputting an own-status report -
U001 Exiting the maintenance mode -
U002 Setting the factory default data -
U003 Setting the service telephone number
U004 Setting the machine number -
U010 Setting the maintenance mode ID -
U019 Displaying the firrmware version -
Initializa-
tion
U021 Memory initializing -
U024 HDD formatting -
Drive,
paper feed
and paper
conveying
system
U030 Checking the operation of the motors -
U031 Checking switches and sensors for paper convey-
ing
-
U032 Checking the operation of the clutches -
U033 Checking the operation of the solenoids -
U034 Adjusting the print start timing
LSU Out Top
LSU Out Left
41/41/41
0/0/0/0/0/0
U035 Setting the printing area for folio paper
330/210
U037 Checking the operation of the fan motors
-
U051 Adjusting the deflection in the paper
0/0/0/0
U053 Setting the adjustment of the motor speed
Full
Half
3/4
-1/-3/-5/-5/-3/-3/13/0
-3/-2/-2/-2/-1/-1/3/0
-1/-3/-4/-4/-2/-2/10/0
Optical U061 Checking the operation of the exposure lamp
-
U063 Adjusting the shading position
0
U065 Adjusting the scanner magnification
0/0
U066 Adjusting the scanner leading edge registration
0/0
U067 Adjusting the scanner center line
0/0
U068 Adjusting the scanning position for originals from
the DP
0/0
U070 Adjusting the DP magnification
0/0
U071 Adjusting the DP scanning timing
0/0/0/0
U072 Adjusting the DP center line
0/0
U073 Checking the scanner operation
100/10200/1
U074 Adjusting the DP input light luminosity
1
To Next Page
Loading...
