2MV
1-3-129
U469 Error codes
Method: [Manual]
1. Select [Print].
2. Press the start key. A chart for adjustment is outputted.
3. Select [Regist].
4. Read figures at MH-1 to 7/CH-1 to 7/YH-1 to 7 and MV-3/CV-3/YV-3 of the reference chart
and enter the figure marked at the scale which the BK fine line is in line with the M/C/Y fine
lines, using the # key or * key.
Figure 1-3-25
5. Press the start key. The value is set.
6. Press the start key after all values have been entered. Color registration correction starts.
7. Print a chart for adjustment.
8. Verify that each scale is within the range of 1to A.
Figure 1-3-26
Item No. Description
Codes Description Codes Description
S001 Patch not detected S004 Original inclination error
S002 Original deviation in the main
scanning direction
S005 Original type error
SFFF Scanner other error
S003 Original deviation in the auxil-
iary scanning direction
CFFF Controller other error
Chart for adjustment
(example)
When a red bar exactly coincides
with B, enter B as a value.
The scale must be corresponding
within the range of "A" from "1".
To Next Page
Loading...
