2MV
1-6-4
3. Reset machine settings.( Resets system menu settings modified at setup to their defaults.)
Main items for settings
[Date/Timer] - Date/Time settings
[Date/Timer] - Timer settings (Sleep timer)
[Edit Destination] - One-touch presetting
[User/Job accounting] - Defaults for user authentication and job accounting only.
Resettings are not required as the data are stored in hard disk.
[FAX] - FAX transmittion settings (tel. no. of itself)
[System] - Network settings (IP address)
[Adjustment/Maintenance] - Silent Mode setting
4. Run the maintenance mode for image adjustments which follows.
1. Performs maintenance mode U464 (Calibration) (see page P.1-3-124).
2. Performs maintenance mode U469 (Auto color registration correction) (see page P.1-3-128).
3. Performs maintenance mode U410 (Adjusting the halftone automatically) (see page P.1-3-109).
NOTE: When connecting the hard disk cables (YC1, YC2) to the PWB, match "BLACK" and "BLUE" marked
on the PWB with the connector colors.
Figure 1-6-5
NOTE: When connecting the USB cables (YC17, YC21) to the PWB, match "BK" and "WH" marked on the
PWB with the connector colors.
Figure 1-6-6
BLACK
BLUE
YC2
YC1
Main PWB
BK
WH
YC21
YC17
Main PWB
To Next Page
Loading...
